CEC Vibration Products Inc. is proud to present the newest addition to the very successful 4-130 family of self-generating, low impedance, velocity output vibration transducers. Designed for use on turbine applications where temperature and noise can cause other sensors to malfunction, the 4-130-0128 can be mounted in tight fit locations to assure actual engine vibrations only are transmitted for analysis.
CEC velocity transducers simplify your analysis system because the low impedance, high level AC mV output does not require special pre-amplifiers or costly low-noise cables. The 4-130-0128 velocity transducer provides a direct calibrated AC mV/inch/sec output that can be transmitted via standard cable uninterrupted to your monitoring system.

For more information, please contact Richard Rogers, Tel: 626-938-0200, e-mail: info@cecvp.com

CEC VIBRATION PRODUCTS INC. MAKES A COMMITMENT TO QUALITY OF THE HIGHEST LEVEL

ISO 9001:2000

COVINA, CALIFORNIA: CEC Vibration Products Inc. today announced the company has obtained
ISO 9001:2000 certification.

ISO 9000 is a set of standards for quality management systems that is accepted around the world. Currently
more than 90 countries have adopted ISO 9000 as national standards. When you purchase a product or
service from an organization that is registered to the appropriate ISO 9000 standard, you have important
assurances that the quality of what you receive will be as you expect. In addition, with the year 2000 revision
of the standard, quality objectives, continual improvement, and monitoring of customer satisfaction provide
the customer with increased assurances that their needs and expectations will be met.

“CEC Vibration Products Inc. is very proud to announce this major new initiative� said Richard Rogers,
Sales Manager. “This is just one more example of our strong commitment to excellence and to our customers.�

CEC Vibration Products remote monitoring devices manufactured in the U.S.A., are used around the
world in the most harsh envrionments 24 hours a day, 7 days a week.

Trust CEC Vibration Products Inc. to bring quality to your field of operation.

Further information about CEC Vibration Products Inc. can be obtained by calling the company's
corporate headquarters at 1-800-468-1345. You may also send your questions or inquiries via email to
info@cecvp.com.

CEC VIBRATION PRODUCTS INTRODUCES DIGITAL VIBRATION SWITCH FOR MACHINE MONITORING

COVINA, CALIFORNIA: CEC Vibration Products is pleased to announce the all-new 1-890 multi-purpose vibration switch.

The 1-890 digital vibration switch is now available to monitor your machine and provide a local or remote indication of a machine fault. With two built-in level alarms, an LCD display, and a calibrated 4-20 mA output proportional to the input, no other single-point sensor gives you this much flexibility.

The 1-890 constantly monitors the vibration levels on critical machinery and provides timely feedback in the event of a machinery fault. There is a 30-second startup delay and an alarm reset that are initiated via a remote input. A three-digit LCD display indicates the current vibration level and is clearly visible to the technician at all times. The two level alarms are easily set to the exact trip levels you require.

CEC Vibration Products' new vibration switch is designed with flexibility in mind. The 1-890 can be added at any level of plant automation, from a basic stand-alone device to a fully integrated condition monitoring system.

For more information please contact Richard Rogers at CEC Vibration Products, Phone: (800) 468-1345 or email: richardr@cecvp.com.